Army Aviation

[JuicyCarp]

Good afternoon guys!

I am looking for the Army Aviation insignia, I checked the pattern depot and did not find them, and I did not find them on the forum. I thought I would reach out and see if anyone might have the .mpc. I would greatly appreciate any input!

Thanks again

Kevin

[James RS]

Just something I did up quick, from your picture

Aviation.ptn

[badbert]

Thought I would give it a try!

[Alan Malmstrom]

I could do this for $18. That would be nicely rounded and wedged feathers in 3D.

[RogerB]

Nice job badbert looks good.

[TerryT]

There is a really nice one here....

http://www.vectorclip3d.com/?ses=&id...d=2785&zone_id=

[henry1]

Nice job badbert looks good.your the man

[RogerB]

Terry they have a lot of nice patterns.There is also there crib boards (still having a hard time setting up the holes have you had any luck)

[TerryT]

I haven't tried their crib boards. I don't have the dxf importer or I would have. I'd like to know how it goes though, so let me know.

[Alan Malmstrom]

There is a really nice one here....

http://www.vectorclip3d.com/?ses=&id...d=2785&zone_id=

That is a nice one Terry. I don't know how much it costs but that is what I could do for $18