gumball machine

[autobodyman]

Thanks everyone, I appreciate the kind words.

Would love to have the pattern if you are sharing. I think I'd try doing most of it with the CW

I didn't really have much of a pattern, kind of just rough drew it up and a few patterns I made up in coreldraw. A few changes from the drawing, used 1/8" tempered glass, so side boards wound up 2-7/8" (¾" back board between side boards 1/8" glass leaving 2" inside for drop boards). If I built this again I would double the number of inside drop boards and reduce the angle to 5° instead of the 17° I used.

Hope that helps.
Thanks ~Mike