I have tried to get this carve to come out right. I wanted the car to come "out" if you will rather than carved "in". I inverted the image to no avail.
I have the C version machine with the latest update. Thanks
Attached is the mpc
I have tried to get this carve to come out right. I wanted the car to come "out" if you will rather than carved "in". I inverted the image to no avail.
I have the C version machine with the latest update. Thanks
Attached is the mpc
Old Trainers never die, The tape just doesn't sitck anymore!
Oldtrainerguy, you need to post the original image, and maybe someone could do something with it. But from what I see in the mpc file, the grays are all wrong. you invert it, the car comes out, but tires go in, and reverse. The image needs to be edited by someone like Alan, who is very good with images. There are a few others here too, but he comes to mind first. In any case the original image needs to be posted.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Do you have the picture ? Please post it.
Capt Barry
Oldtrainerguy,
If you get an answer by PM please post it I have got the exact same problem with a Cord. Jim
Packard5.mpcWill this work?
We don,t want the mpc but what you used at the beginning, a picture would be great.
'
Capt Barry
Jiml the same goes for you. Post the picture to see if we can help.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
I did not have much time but found another image, that was much nice as to colors, and made this one.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
I tried to give you a different look. Sorry it took so long, computer trouble.
Capt Barry
I have made a car but am not able to upload it to the server. Oh, there it is. It seems to appear when I view it in the forum. That's strange. Anyways if anybody wants to know how to do this type of thing write me an email and I'll send you a file with layers and how I get the layers to adjust the height and depth. Same thing I sent to Joe.
Last edited by Alan Malmstrom; 01-26-2013 at 03:41 PM.