Sorry, should be an easy one for you all here but I have yet to set up the Carvewright and fool with it. I do want to lay out a project that will need the max width to be cut for outer and inner slots.
I would like to set up a layout with 14 1/2" wide board and what is the closest you can place your cut lines to the edge. Have looked on and off for several days and tried a search but no luck. If you know that would save me setting up the file with too close of cut lines and to re do it. Also where would one have found this info.
I know I seen it some where but can't find it now.
Thanks in advance.