Thanks for sharing... looks incredible. just tried it out with some plain old pine. can't wait to glue it together. should be very cool.
Thanks for sharing... looks incredible. just tried it out with some plain old pine. can't wait to glue it together. should be very cool.
Butch, thanks for showing it carved, and you are welcome. The box came out really beautiful.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Clever idea! That turned out very pretty!
-Colleen
the center piece I cut out was too big to place at an angle. which mpc did you use? I assume you laminated three pieces to get the results you got....looks awesome....
That box looks great!
I hope you will reconsider your getting out of the CW world- it's Christmastime and lots of companies are getting a day off here and there so their employees can spend time with their families. Perhaps your dissatisfaction is due to this?
What problems are you having; maybe we can help....
Lawrence
Rickyz, look at the first post. Angles have to be manually cut n the center section, and the V has to be cut manually on the tips of the ribbons so it fits.
See post 10 for the mpc. and post 9 for instructions sheet Butch posted.
Last edited by eelamb; 12-26-2012 at 09:06 PM.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
I guess you were serious!! http://www.ebay.com/itm/CarveWright-...item4abfde2d06
"Carved with Love"
Happiness comes from within.
But joy comes from helping others.
Measure twice... and then sneak up on it!
Yep, real serious.
The center piece has to have 4 small champhers sanded to get it to fit at 45 degree angle.
Last edited by dunracin; 12-29-2012 at 07:38 AM.