Results 1 to 8 of 8

Thread: AskBud Dust Collector Fitting

  1. #1
    Join Date
    Feb 2007
    Location
    Presque Isle, WI
    Posts
    78

    Default AskBud Dust Collector Fitting

    Hi.. i just downloaded, carved and assembled the dust collector for my machine. It looks like it will do a good job once I can find a source for the 4" 45 degree fitting. I've spent a bit of time searching but so far no luck.

    Anyone know where I can find one?

    Thanks!
    Pete

  2. #2
    Join Date
    Sep 2011
    Location
    Saginaw, Texas
    Posts
    1,082

    Default

    Don't know if this will work but here is something I found on amazon http://www.amazon.com/gp/aw/d/B0035Y...634104-1910014



  3. #3
    Join Date
    Feb 2007
    Location
    Presque Isle, WI
    Posts
    78

    Default

    Thanks for the response, chief. I saw several elbows but not one that has a plate and holes for mounting. Most are 2 1/2" for router fence mounting.

    pete

  4. #4
    Join Date
    Feb 2008
    Location
    Indian Lake, Ohio - Rts 33 & 235
    Posts
    3,967

    Default wood craft store

    Quote Originally Posted by Northwoods Wood-crafter View Post
    Hi.. i just downloaded, carved and assembled the dust collector for my machine. It looks like it will do a good job once I can find a source for the 4" 45 degree fitting. I've spent a bit of time searching but so far no luck.

    Anyone know where I can find one?

    Thanks!
    Pete
    when I designed this my top loaded Vacuum Head, which may be what you now have, I got my 4" 45 degree fitting at the Wood Craft Store.
    AskBud
    AskBud Downloads =>> CLICK HERE
    Lesson added
    7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"

    CW Vacuum Head Project =>> CLICK HERE
    AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons

    More than 1250 AskBud patterns
    vvv-CLICK BELOW-vvv
    http://store.carvewright.com/manufac...ufacturerid=29

  5. #5
    Join Date
    Feb 2007
    Location
    Presque Isle, WI
    Posts
    78

    Default

    Thanks! Yes... I do now have your system. I checked Woodcraft but didn't find one. I'll check again.

    Pete

  6. #6
    Join Date
    Feb 2007
    Location
    Presque Isle, WI
    Posts
    78

    Default

    Woodcraft only has a 2 1/2" fitting in that config. I may have to adapt the collector for a straight fitting. Shouldn't be too much problem. I may just take the top off the machine altogether. No kids in my household.

    pete

  7. #7
    Join Date
    Feb 2008
    Location
    Indian Lake, Ohio - Rts 33 & 235
    Posts
    3,967

    Default

    Quote Originally Posted by Northwoods Woodcrafter View Post
    Woodcraft only has a 2 1/2" fitting in that config. I may have to adapt the collector for a straight fitting. Shouldn't be too much problem. I may just take the top off the machine altogether. No kids in my household.

    pete
    Here it a link to the item.
    It may not be a true 46 degree, but you can see it's on an angle.
    AskBud
    http://www.woodcraft.com/product/200...l-fitting.aspx
    AskBud Downloads =>> CLICK HERE
    Lesson added
    7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"

    CW Vacuum Head Project =>> CLICK HERE
    AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons

    More than 1250 AskBud patterns
    vvv-CLICK BELOW-vvv
    http://store.carvewright.com/manufac...ufacturerid=29

  8. #8
    Join Date
    Feb 2007
    Location
    Presque Isle, WI
    Posts
    78

    Default

    Thanks! I don't know how I missed it.

    Pete

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •