yup... I have a A machine that was in that category & needed the A907 upgrade. Did it and all is good....
Originally Posted by
lynnfrwd
All C machines are CarveWright and have CarveTight.
All A and B machines could be CompuCarve or CW and came with Quick Chuck can be upgraded with CT.
Only A machines made (not necessarily sold) during the first few months (up to about Feb 2007) have the old 18-pin and need the A907 upgrade. You cannot determine this by the serial number, but we can. The A907 must be upgraded if you want to add CarveTight.
Sent from my iPhone using Tapatalk
JerryB:.
CarveWright START U Team Member
Using 1.187, Conform, PE/Probe, Centerline.
"Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"