Some times a segment gets 2 handles and some times only 1 and no control over which end of the segment the handle is on. Is there a rationale for how the program decides what to give me? Is there a way to control this?
Clint
2016 Conference Sponsor
Spline tool question
Some times a segment gets 2 handles and some times only 1 and no control over which end of the segment the handle is on. Is there a rationale for how the program decides what to give me? Is there a way to control this?
Clint
Senior Member
I noticed this too, when drawing connected splines. One workaround that helped the other day was for me to copy and paste a segment that I happened to get with two handles, then join them and manipulate them. I ended up with a closed path of multiple splines all with two handles, which was what I needed.
2016 Conference Sponsor
I will try that, but there should be an easier way. It is tight to work in the bottom windows provided with the 3D functions. Anything from the software people?ThanksClint
In Memoriam
You may stretch the lower window, and grow the drawing area.
AskBud
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Junior Member
Ive sometimes had success converting to a line and then converting back to spline to get 2 handles
Posting Permissions
Reply With Quote