Using the free program Blender.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
PCW I used blender to import the stl file, then exported using new name. Then designer to open that file, and slice. I admit I did use zb to smooth some of the first image, then meshlab to convert the obj to stl again.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
jkpq45, how big is the igs file? Is it possible to zip it and upload that file. I would like to see how Moi3d handles opening the igs file.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
edit: See post #38 for IGS file (3D image I started with.)
Last edited by jkpq45; 08-01-2012 at 08:24 AM.
The link does not get me to the file. I get the sign up for the google drive storage. Thanks
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
One more try, thanks for all your patience!
I'd say pretty well eddie! I'll let you play around with it more as you are far more advanced than I with MOI.
Doug Fletcher
And a grayscale bitmap, finally: