Results 1 to 7 of 7

Thread: sandpaper?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default sandpaper?

    hey folks...

    completed .. 3 small projects 3/4 pine..soft.. combined project time 4.250 run time..

    noticed front roller paper / sides have torn away and are starting to tear..

    is there anything i can check to see why//or is this normal wear?

    thanks
    the giz

  2. #2
    Join Date
    Jan 2007
    Location
    california
    Posts
    70

    Default

    there is a link in the fix it pdf for taking off the sandpaper track. although you should get a beta tester to confirm this: i think you have to take the sand belt off and simply adjust it.

    http://www.carvewright.com/forum/viewtopic.php?t=1294
    if you don't expect too much from me, you won't be let down.

  3. Default

    Quote Originally Posted by Malfunction View Post
    there is a link in the fix it pdf for taking off the sandpaper track. although you should get a beta tester to confirm this: i think you have to take the sand belt off and simply adjust it.

    http://www.carvewright.com/forum/viewtopic.php?t=1294 omegle new
    This kind of wear is often normal over time with use.


    To troubleshoot, you could check the roller alignment, ensure there's no debris or obstructions, and inspect the roller condition. If the damage seems excessive, you may need to replace the roller or have the machine serviced.

  4. #4

    Default

    You can take a rasor blade to the torn part and remove it w/o taking the whole thing apart. Contact CW tomorrow for a replacement.
    The 50-50-90 rule: Anytime you have a 50-50 chance of getting something right, there's a 90% probability you'll get it wrong.

    Do it on a Mac.
    Vietnam Vet '65-'66

  5. #5

    Default

    sandpaper i have the latest ver just up dated again
    try to doit all but only what i can

  6. #6

    Default

    Quote Originally Posted by thaley
    sandpaper i have the latest ver just up dated again

    ????? what?

  7. Default

    Regarding your notice that the front/side paper stripes have been torn and are continuing to be torn, this may be a normal phenomenon due to wear and frequent use. Check to see if the wheels are worn or worn. If necessary, replace them. Proper lubrication will help reduce wear so check that moving parts are adequately oiled/lubricated. Replace worn or deformed paper clamps. Check to see if the paper tension is correct. If it's too loose or too tight, readjust it.

    the official rice purity test

Similar Threads

  1. Bit trying to cut through sandpaper
    By lex227 in forum Techniques
    Replies: 6
    Last Post: 02-01-2007, 01:36 PM
  2. Replacing sandpaper belt
    By sundog2001 in forum Troubleshooting
    Replies: 5
    Last Post: 01-26-2007, 10:32 AM
  3. Sandpaper belt slid to the right and wood will not move
    By Mike N in forum CarveWright Machine
    Replies: 8
    Last Post: 01-21-2007, 01:16 AM
  4. Sandpaper drive belt
    By myersbear in forum CarveWright Machine
    Replies: 1
    Last Post: 12-29-2006, 05:08 PM
  5. Sandpaper Belt
    By danvanw in forum Troubleshooting
    Replies: 6
    Last Post: 12-16-2006, 07:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •