Member
sandpaper?
hey folks...
completed .. 3 small projects 3/4 pine..soft.. combined project time 4.250 run time..
noticed front roller paper / sides have torn away and are starting to tear..
is there anything i can check to see why//or is this normal wear?
thanks
the giz
Member
there is a link in the fix it pdf for taking off the sandpaper track. although you should get a beta tester to confirm this: i think you have to take the sand belt off and simply adjust it.
http://www.carvewright.com/forum/viewtopic.php?t=1294
if you don't expect too much from me, you won't be let down.
Senior Member
You can take a rasor blade to the torn part and remove it w/o taking the whole thing apart. Contact CW tomorrow for a replacement.
The 50-50-90 rule: Anytime you have a 50-50 chance of getting something right, there's a 90% probability you'll get it wrong.
Do it on a Mac.
Vietnam Vet '65-'66
Junior Member
sandpaper i have the latest ver just up dated again
try to doit all but only what i can
Member
Originally Posted by thaley
????? what?
Posting Permissions
Reply With Quote
