Results 1 to 4 of 4

Thread: 3D Modeling question

  1. #1
    Join Date
    Apr 2007
    Location
    McCamey, Texas
    Posts
    9

    Post 3D Modeling question

    Do you have to purchase both the 2D and 3D modelilng suites to create desirable patterns?
    I have some artistic drawing ability but want to be able to bring them to life.

  2. #2
    Join Date
    Feb 2008
    Location
    Indian Lake, Ohio - Rts 33 & 235
    Posts
    3,972

    Default

    Quote Originally Posted by Hoheboe1 View Post
    Do you have to purchase both the 2D and 3D modelilng suites to create desirable patterns?
    I have some artistic drawing ability but want to be able to bring them to life.
    From your question, I see that you are better equipped than the average bear.

    If I had a restricted budget, my first choice would be the 3D package as it provides a wealth of contour variations. The 2D package gives us items that some may already have in Corel or Aspire. 2D is an economical alternative. Having one or both (2D & 3D) should negate the major need to purchase or master Aspire or Corel to accomplish the task.

    I bought both, and I'm learning quite a bit as my shared lessons might indicate.
    AskBud
    AskBud Downloads =>> CLICK HERE
    Lesson added
    7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"

    CW Vacuum Head Project =>> CLICK HERE
    AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons

    More than 1250 AskBud patterns
    vvv-CLICK BELOW-vvv
    http://store.carvewright.com/manufac...ufacturerid=29

  3. #3
    Join Date
    Apr 2007
    Location
    McCamey, Texas
    Posts
    9

    Default

    Thanks for you reply. I was holding back until I could get more information on these products. I do have a limited budget and wanted to make sure the new programs would take me to a whole new level. I watched the AskBud videos, but they were fairly basic, not alot of detailed creativity.

  4. #4
    Join Date
    Feb 2008
    Location
    Indian Lake, Ohio - Rts 33 & 235
    Posts
    3,972

    Default

    Quote Originally Posted by Hoheboe1 View Post
    Thanks for you reply. I was holding back until I could get more information on these products. I do have a limited budget and wanted to make sure the new programs would take me to a whole new level. I watched the AskBud videos, but they were fairly basic, not alot of detailed creativity.
    Please be advised that I'm learning the ins & outs of the new software, on the fly, as I make the "Part-1" series. I'm not, in any way, trying to do anything but help folks get a basic feel for the new tool. Michael Tyler and LHR are both working on tutorials as well, which I expect will be much more involved.

    Before I drove a car or van, I walked, and then had a bike, next a moped, and I'm still not ready for a Greyhound or a Semi!
    AskBud
    AskBud Downloads =>> CLICK HERE
    Lesson added
    7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"

    CW Vacuum Head Project =>> CLICK HERE
    AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons

    More than 1250 AskBud patterns
    vvv-CLICK BELOW-vvv
    http://store.carvewright.com/manufac...ufacturerid=29

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •