My latest project

[Cabinetdesigner]

this was a fun project using centerline text and conforming vectors.

[badbert]

Is that amber shellac? Very cool!

[ladjr]

Every Nice. But I could hardly see the signatures.

[Cabinetdesigner]

Is that amber shellac? Very cool!

The wood is cyprus with poly finish

[Cabinetdesigner]

Every Nice. But I could hardly see the signatures.

Yes it does not show up well in the photo. I thought about darkening the signatures but was no sure of the best way to do it.

[b.sumner47]

Next time have them write harder. Well Done !


Capt Barry

[Ike]

Yes it does not show up well in the photo. I thought about darkening the signatures but was no sure of the best way to do it.

What I would do is brush in a dark color, i.e. black and then lightly sand. Or just a Sharpie pen and follow the lines and then sand any overage by hand.

Ike

[rcdages]

As Ike stated you could brush on a dark color. Since you have a finish (Sealer) on the project.

Once you brush the dark color over the signatures wipe off the dark color that in on the surface with a cotton rag.

That is way it is best to have a finish/sealer on any project were you are going to color paint or fill the center line text.