Originally Posted by
badbert
I certainly don't want to appear ungrateful or petty. All of the rope patterns I find are just a little skewed or uneven. We have decided to carry the rope theme throughout our home. This will require a more accurate rope. Most of you have seen my stallion door header. the rope that I used to surround stallions was inaccurate and a little crooked. it required a lot of post carving work to look anywhere near realistic. so I am requesting a more accurate rendering of a rope. Or rather two ropes. For the sides of my entry door. I want to carve rope columns. They will be 4.5" wide .8" deep 80" long. I will impose my address on one side and street on the other. The problem... At that size the rope looks like a barber pole. That size rope is made up of smaller ropes. The contrast between the rough rope and the smooth surface of the letters should be cool. I also need a straight rope section, 12" long .8" deep 1.625" wide. I need it to be tileable with smooth tansitions. I hope someone can help out!
Will This Work? The MPC would not post, it was over 1MB (1.65MB)
Last edited by bjbethke; 06-18-2012 at 08:41 PM.
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.