Very nice.
Happy Carving
Robert D.
rcdages
CarveWright START U Team Member.
The mightiest oak in the forest is just a little nut
that held it's ground.
Any tips on how you did the frame?
I've been wanting to do that for some time now.
Kenny
I just purchased the new draw suite, but having a hard time. I finally figured out of what I needed, but I can't seem to get the pattern to rotate after I completed the drawing. Also, does anybody have any user instruction on this, I could sure use it. thanks
Andrea
Bud Has posted several Tutorials on his web site. http://www2.wcoil.com/~nharbison/cw-...0downloads.htm. Good Luck
Leo Davenport
Enjoy Life Carve Something everyday
Have you seen any of the 2D & 3D lessons I've made this week? If not, go here: http://forum.carvewright.com/showthr...5383-tutorials
It takes you to my download page.
You rotate problem may be covered in my lesson titled "Rotate a Connected Line Figure".
AskBud
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Hi Andrea!
Perhaps the video tutorial I released recently will help you get a good start on the new drawing tools. There are two versions...one is a streaming video with a Table of Contents that makes it convenient to click and go to a section on the video. The other is a downloadable 88 MB WMV that you can store and watch on your own computer. (The WMV filetype doesn't support the Table of Contents function, but you can scroll through the video manually, as normal.)
The video covers all five of the main tools included in the CarveWright 2D Suite. The video is about 40 minutes in length and features examples and tips of how each tool can be used.
The five primary tools are:
• Offset Path Tool
• Trim Vector Tool
• Smart Spline Drawing Tool
• Copy-Offset Tool
• Import Tracing Image Function/Tool
Call or email me if you have any questions I can help you with. You cannot rotate vectors...BUT you can make enclosed vectors into a carve region, save as a PTN, put the PTN on the board, rotate that any way you wish, then use the Outline Tool to make your new outline!
Last edited by mtylerfl; 07-11-2012 at 06:58 AM.
Michael T
Happy Carving!
╔═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══╗
Thanks. Looking forward to it.I will put a quick explanation together and post it shortly.
Kenny
Yes I did watch it, great video. I have a few questions through, I am doing a two piece project, IM, me your email and I will email you the details and questions. Thanks
Andrea