CW Discussions on Other Forums

[lynnfrwd]

There are quite a few discussions about CarveWright on other forums. Some good, some bad and some just plain wrong. A lot of the information being shared is out dated and doesn't apply to the Version C. Some people responding only have the experience or memories of the early model A machines. We would like to change CW's image and need your help. As an employee, I cannot reply to some or add input when I would like. So, I will be posting interesting topics here for you guys to (if you so choose) carry the torch!

There are several of you already doing that and I truly appreciate it.

[lynnfrwd]

Here are two threads from Signs101 Forum:

http://signs101.com/forums/showthread.php?t=94326&highlight=carvewright


http://signs101.com/forums/showthrea...ht=carvewright

Connie

[Digitalwoodshop]

Signs101... One of my Favorite Forums.... I chimed in as I have been a member for a few years.

Sawmill Creek is another one that has CW Threads that Connie, Lawrence, others and I have Chimed in on...

The Proof in the Pudding to spend some time reading the Troubleshooting Threads HERE.... Normal Wear and Tear and the occasional bad part..

AL

[lynnfrwd]

http://www.routerforums.com/cnc-routing/35920-newbie-looking-into-cnc-router-how-do-decide.html

[chebytrk]

Yup... me too. Threw in my 2 cents.

[lynnfrwd]

http://signs101.com/forums/showthread.php?t=96969

[lynnfrwd]

These are on Lumberjocks



http://lumberjocks.com/garageguy/blog/29254



http://lumberjocks.com/topics/34815


This one is a little bit old, but still being looked at when ppl search for CarveWright

http://lumberjocks.com/topics/4195

[cestout]

I will do what I can, but I hardly have time to come to this forum, so I don't get to others. I agree with Lawrence that honesty is the best approach. It is a hobby level machine and does require some maintenance. I just used mine for industrial level work for a month and they (one at the start and acquired a second to finish the job) made it thru just fine. Observation and some repairs were required along the way, but I would think that industrial level CNCs would require the same. When you consider 4 important factors, cost, footprint, capacity (thinking of the Click&Carve), and ease of use, I don't see another CNC that comes close.
Clint

[mtylerfl]

There are quite a few discussions about CarveWright on other forums. Some good, some bad and some just plain wrong. A lot of the information being shared is out dated and doesn't apply to the Version C. Some people responding only have the experience or memories of the early model A machines. We would like to change CW's image and need your help. As an employee, I cannot reply to some or add input when I would like. So, I will be posting interesting topics here for you guys to (if you so choose) carry the torch!

There are several of you already doing that and I truly appreciate it.

Yes, it is somewhat frustrating to see/read what people write...so much erroneous info and unfounded "opinion" it's not even funny. I would say some of the stuff is just plain crazy. Hoping this turns around sooner than later!

BTW, I still use a totally unmodified "A" machine. I think the A machines have gotten an unusually severe "bad rap" - I've made tons of cool things with it just fine! No ripped belts, no broken gears, no tracking problems, nothing unusual in the way of maintenance. I will install the CarveTite one of these days, primarily for the convenience of having the same bit configuration as my other machine (I will be one of the few that will miss the QC, I suppose).

[lawrence]

I'm an active member on several forums and have found that for me, the best option is often to not talk up the CW too much (though I can and sometimes do so) It also helps if you post/are an active member of the forum itself... just coming out of the blue can seem disingenuous. In fact, the fact that this forum's members were encouraged to to talk up the CW on other forums was noted (and not taken well) in the past... The posts by others like Al are also great for increasing the CW's reputation as his expertise and knowledge is readilly apparent.

I find that when I just post my projects and then mention that I use my Carvewright I usually get lots of questions and try to answer them as and when I can. I also try to be honest... lets face it, there have been problems with the machine and customer service in the past. I admit this and also try to point out that things have improved and continue to improve on both counts. This honesty seems to (usually) alleviate questions that I am "in the pocket" of LHR. It is also well worth noting to folks that while this is a great little machine, it is not built for industrial use... it is a hobbiest tool built to hobbyist specifications. This isn't necessairally a bad thing... it's the niche that the CW fills and I'm honest about it.

In the end, it really is the results that matter When all else fails, show them just how easy it can truly be to get GREAT results. The proof is in the pictures!

Lawrence