New dust collector from erwin products

[mcQ]

I AM THE OWNER OF ERWIN PRODUCTS AND AS A PROFESSIONAL PRODUCT DESIGN ENGINEER, EXPERT WOODWORKER AND CARVEWRIGHT USER I HAVE DESIGNED AND MANUFACTURING AN O.E.M. QUALITY DUST COLLECTION ACCESSORY FOR THE CARVEWRIGHT AND COMPUCARVE MACHINES. PLEASE VISIT MY WEBSITE AT http://www.erwinproducts.com FOR MORE INFORMATION AND TO VIEW A YOUTUBE VIDEO DEMONSTRATION.

[TerryT]

Wow! Sure is pretty! If it works as good as it looks, you have a winner.

[mcQ]

Terry, click the link for my website http://www.erwinproducts.com/ and watch the 2 videos the first is an introduction and the 2nd is a demo.
Erwin

[lawrence]

wow, that's a every elegant alternative- thank you for sharing your site with us.

Lawrence

[WoodenWizard]

Do you have to do any machine modifications?

[mcQ]

Yes the clear plastic cover is cut straight across even with the existing flat area on each side of the cover. The best way to cut it is using a Dremel or RotoZip spiral saw with a 1/8" bit with piloted end and clamp a straight piece of hardwood to the back side of the cover flush with the flats at each side as a guide. Clean up edge with file or sandpaper.
I am working on an installation video which I will post on my website later this week. http://www.erwinproducts.com
Erwin

[chebytrk]

I agree with TerryT. It would be nice to see the different Dust Collector hoods at the Conference. Although I am partial to Floyds it would be interesting to see them all....... especially bergerud's. Maybe all DC hood makers that can not make the Conference can send in their product to be "demo'd" for all to see? Any thoughts? Same thing could be done for other products that have been made to use with the CW (ie... rotary jig, etc). Excellent time & opportunity to "show it off".

[fwharris]

I agree with TerryT. It would be nice to see the different Dust Collector hoods at the Conference. Although I am partial to Floyds it would be interesting to see them all....... especially bergerud's. Maybe all DC hood makers that can not make the Conference can send in their product to be "demo'd" for all to see? Any thoughts? Same thing could be done for other products that have been made to use with the CW (ie... rotary jig, etc). Excellent time & opportunity to "show it off".

Jerry,

Yes this year my DC-INSERT will be at the conference. Lesson learned from last year!

[CNC Carver]

Sure does look good. Looks like it works good in the video also.

[Digitalwoodshop]

I agree, sure is pretty....

AL