Page 3 of 331 FirstFirst 123451353103 ... LastLast
Results 21 to 30 of 3307

Thread: Pattern sharing depot

  1. #21

    Default Butterfly

    This is a scan of a butterfly I cutout and carved for the back of a mirror, years ago. The scan size is 3.81" x2.38"

    ~Mike
    Attached Thumbnails Attached Thumbnails butterfly_376.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

  2. #22
    Join Date
    Nov 2006
    Location
    Theodore, Alabama
    Posts
    62

    Default Scanning for decrative items

    This is a scan of grapes on a vine. I had to make it durring the day when my wife was not here, as it is a screwed on piece of her fine silver.
    Attached Thumbnails Attached Thumbnails grapes_358.jpg  
    Attached Files Attached Files
    http://allcw.com/

    Patterns reasonably priced at or below cost.

    Carving in LA (Lower Alabama)

  3. #23

    Default anchor

    This is a scan of a door panel section I carved by hand a few years ago. The achor and chain were cut from a seperate piece glued to the door and then carved along with the background. The size of the scan area was 4.55" x 7.97" x .42"

    ~Mike
    Attached Thumbnails Attached Thumbnails anchor_554.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

  4. #24

    Default Playing with Xara

    I have an old program Xara 3D 4.0 I've been messing with it a little to see if it would render anything useable for the CarveWright. I think it works pretty well for flat black & white solids. Here's one I made with it. Text and simple objects seem to work to round the edges or bevel the edges. I don't think it would work for anything very complex.

    ~Mike
    Attached Thumbnails Attached Thumbnails suits_120.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

  5. #25

    Default Another Xara

    Just a name but once I save the settings in Xara I can use any font or name that looks good. Then I just import it, save it to the favorites, right click it and export as a ptn file.

    ~Mike
    Attached Thumbnails Attached Thumbnails mike_206.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

  6. #26

    Default Flatbed scanner

    I'm waiting for the CarveWright to finish a scan so I decided to try something. I had a carved square applique, I scanned it in greyscale on my flatbed scanner, did a smooth and soften in my photoediting software and imported it into CarveWright. Here is what I came up with, at some point I will have to scan this with the CarveWright and see if it does better.

    ~Mike
    Attached Thumbnails Attached Thumbnails square_517.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

  7. #27

    Default Hand mirror back

    This is a scan of a hand mirror I made a while back. The band around the back was actually walnut, the mirror body was oak, and the rose was bloodwood. I'm not sure how to carve the other side with the machine, but I guess it could be done pretty easily with a dremil tool.

    Thanks ~Mike
    Attached Thumbnails Attached Thumbnails mirror_197.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

  8. #28
    Join Date
    Jan 2007
    Location
    Ohio
    Posts
    85

    Default Sign Board

    Here's a signboard I created but have not done cut out as of yet.
    Attached Thumbnails Attached Thumbnails sign01_168.jpg  
    Attached Files Attached Files

  9. #29
    Join Date
    Dec 2006
    Location
    Wisconsin
    Posts
    449

    Default Just for kicks

    Just for kicks .

    Just waiting for some clear coate to set and tried these wingdings they seem to carve ok check them out.

    Mods you can delete this post if you like.
    Attached Thumbnails Attached Thumbnails wingdings_523.jpg  
    Attached Files Attached Files
    Computers-Yuk....I should junk it...It never does what it should do...only what I tell it.

  10. #30
    Join Date
    Jan 2007
    Location
    Emmett, ID
    Posts
    511

    Default

    The eagle's head I've been working on is ready (as far as I'm concerned).
    Attached Files Attached Files

Page 3 of 331 FirstFirst 123451353103 ... LastLast

Similar Threads

  1. Sharing some future kindlnig
    By alexa in forum Projects Gallery
    Replies: 11
    Last Post: 05-02-2008, 03:56 PM
  2. sharing/ found a lil secret for eps files..
    By GIZMO1D1 in forum Techniques
    Replies: 37
    Last Post: 03-06-2007, 05:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •