Page 2 of 332 FirstFirst 12341252102 ... LastLast
Results 11 to 20 of 3315

Thread: Pattern sharing depot

  1. #11
    Join Date
    Dec 2006
    Location
    Wisconsin
    Posts
    448

    Default

    Hello rgant05,
    I attached a .jpg along for you to see just in case it is not the correct file.
    Bill.
    Attached Thumbnails Attached Thumbnails lamp1_458.jpg  
    Attached Files Attached Files
    Computers-Yuk....I should junk it...It never does what it should do...only what I tell it.

  2. #12

    Default Dorr Embelishment scan

    Here is a ptn file of a door emblishment I scanned in (took over 8 hours ). The size is 12.24" x 7.68"

    Please let me know if you carve any of these if they are coming out okay. So far I've just been scanning stuff.

    Thanks ~Mike
    Attached Thumbnails Attached Thumbnails door1_159.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

  3. Default fancy welcome

    This may be handy for some applications
    Attached Files Attached Files

  4. #14
    Join Date
    Oct 2006
    Location
    Vancouver, WA
    Posts
    42

    Default Harly

    Here's a Harley logo

    Got it from www.brandsoftheworld.com
    in EPS format, brought it in to CorelDRAW made it larger by stretching, copied, then imported in to CW. Took all of a couple minutes.

    PS, BOTW is in a different country (Russia, I believe) that doesn't follow the US's copywrite laws. So just because you get a logo, doesn't mean you have the right to use it. I personally don't worry about making gifts, but if you make a bunch and sell, you may eventually get in a little trouble.

    Shaddy
    Attached Thumbnails Attached Thumbnails hd_142.jpg  
    Attached Files Attached Files

  5. #15
    Join Date
    Oct 2006
    Location
    Vancouver, WA
    Posts
    42

    Default John Deer

    Here's a John Deere logo, might be of interest to some

    Shaddy
    Attached Thumbnails Attached Thumbnails jd_124.jpg  
    Attached Files Attached Files

  6. #16
    Join Date
    Jan 2007
    Location
    california
    Posts
    70

    Default

    here's my final product of a chaos symbol i made with the programs DrawPlus8 and the trial version of photoshop.
    Attached Thumbnails Attached Thumbnails chaos_708.gif  
    Attached Files Attached Files
    if you don't expect too much from me, you won't be let down.

  7. #17

    Default Carpenter Intrasia scan

    This is a scan of a goofy carpenter guy I made a few years ago.

    I had a bit of trouble while scanning this the hot glue let go at the top. In the pattern editor I tried to clean it up a little, that would be something I'd like to add to the wish list, a clone tool. If anyone can clean this up better please repost it.

    Took 16 hours to scan and 20minutes to download from the card.

    Thanks ~Mike
    Attached Thumbnails Attached Thumbnails carpenter_183.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

  8. #18
    Join Date
    Feb 2006
    Location
    Missouri Valley Iowa
    Posts
    669

    Default Light house

    May have some interest scaned old light house carving
    Attached Files Attached Files
    OLD SALT

    Member CarveWright Start U team

  9. #19

    Default Picture frame scan

    This is a scan of a picture frame. I didn't scan the back so it would need to be done either with the carvewright or by hand to fit the glass into a rabbit. The original scan size was 1.05" deep 6.94" x 8.41"

    How would a person cut this out of say a 1" thick board, would I need a backer to keep the machine from cutting into itself?

    Please let me know if these are working out, I thought I'd get all my scanning out of the way before I started using the machine to carve.



    Thanks ~Mike
    Attached Thumbnails Attached Thumbnails pictureframe_510.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

  10. #20

    Default

    This is a scan of a mermaid I carved ( with dremil tools) into a cabinet drawer front. The scan came out a bit odd, has some lines in the face area that aren't in the carving. I'm attaching a picture of the original carving as well, it's on red oak. Scan size is 4.73" x 15.29" x .588"

    If anyone carves this with the machine, would you mind posting a picture of the carving in the gallery and let me know if the lines cause any problems?

    Thanks ~Mike
    Attached Thumbnails Attached Thumbnails mermaid1_151.jpg   mermaid_687.jpg  
    Attached Files Attached Files
    If at first you do succeed - try to hide your astonishment.

Page 2 of 332 FirstFirst 12341252102 ... LastLast

Similar Threads

  1. Sharing some future kindlnig
    By alexa in forum Projects Gallery
    Replies: 11
    Last Post: 05-02-2008, 03:56 PM
  2. sharing/ found a lil secret for eps files..
    By GIZMO1D1 in forum Techniques
    Replies: 37
    Last Post: 03-06-2007, 05:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •