heres a fork truck
heres a fork truck
Seeking a picture Frame file larger than 5x7. Dont care if it has fancy stuff on it or not. Preferably 8x10 if I can get it.
Thanks!!
See if this one will do the Job
I just made it up, a basic 8" x 10"
to see if would help you out.
You can add anything to it you may
want or need.
Last edited by Kenm810; 04-04-2009 at 11:46 AM.
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
that's awesome! Thanks so much for your help!!
mkII gun
on a side note i ordered a 1/8 bit off amazon and the bit was not tight at all i could undo both set screws by hand. I had some lock tight so i fixed it
Those will work great!!!
Ken, that is exactly the plan when she's in for her next MRI. Already have some butterflys, Micky Mouse (or is it Mice? ) and some starfish, carved/cut out. Just need a t-bear or 2 to round it off. I hate kids in hospital, so naturally I'll go overboard.
Bernie :^)
Wisdom has no value unless it's shared.
Ver. 177 in Test mode Ver.134 in reserve
I am looking for the flower Blue Bells, if anyone has some to share
thank you
joe
Hi Joe,
Will these work for you
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Those flames are awesome, thanks a bunch. When I get the project done I am using them in I will post it.
Ed
Ed Smith
A WoodSmith
Lanoka Harbor, NJ