Pattern sharing depot

[chebytrk]

add Masking Tape and on opposite side of LCD and let it stick over by 1/4 in. In general Mike doesn't have edge carvings and it will work. I haven't seen the lay-out, you can also reset the board to 11" in edit board preferences without having to resize anything.
Eva

Great! I'll give it a try. Thanks

[tablerock]

Anyone have a Cleveland Cavs logo set up for carving?
Thanks

[blantz]

tablerock,

Here are four Cleveland Cavs logos.

[fatguy1965]

Anyone have anything on the Cincinnati Reds? I grew up with the Big Red Machine and its been rough being a fan the past few years but we've got a pretty good team this year!

[mtylerfl]

mtylerfl ,


Can you tell us what the approx carving time is on this pattern if we leave all settings as you carved it?

Hello Azbear,

On BEST it's 3¾ hours...on OPTIMAL it's 8½ hours. I did two of them...one on each setting...I prefer the OPTIMAL setting.

It is setup for a two-sided carve. The back carve is simply the recess for the mirror. An option... you can delete the backside carve and mount the mirror directly on the flat backside instead of within a recess. Only saves about 7 minutes of carve time though.

[Rogernlinda]

Does anyone out there have any patterns of a house. I am making a nameplate with a house on it and the last name of the newly weds.

[blantz]

fatguy1965,

Here are some patterns of Cincinnati Reds logo and mascot.

[want2b]

Does anyone out there have any patterns of a house. I am making a nameplate with a house on it and the last name of the newly weds.

Posted 2 house/business a couple of weeks ago here in the gallery if they are any help. A search on user or topic should bring them up.
Rick H.

[fatguy1965]

I was one that didn't check the lube on my CC when I got it. Burned the flexshaft in 4 hrs. I should have my new one Monday and will definately be using what you sent. Thanks again!

[bjbethke]

Does anyone out there have any patterns of a house. I am making a nameplate with a house on it and the last name of the newly weds.

Will this work?