Black Forest Wall Shelf - Project of the Month APRIL 2012

[mtylerfl]

Hello,

Here is a preview of the next Project of the Month (for APRIL 2012), the Black Forest Wall Shelf.

This wall shelf project features a leaf and curved wood branch design that draws its inspiration from legendary Black Forest design themes. The decorative shelf is great for displaying favorite knick knacks, a small plant or a special treasured item.

The project uses the 1/16" Carving Bit and the 1/8" Cutting Bit. The overall dimensions of the finished project are about 18"h x 10¼" w x 5½"d.

Main items you will need:

1) The Project Files (included):
• Black_Forest_Panel.mpc
• Shelf-and-Bracket.mpc

2) Boards with the following dimensions:
Black Forest Panel: .75" x 11" x 25”
Shelf and Bracket: .75" x 6" x 22"

(NOTE: Do not use boards that are smaller than specified above, or if you are using a sled, you can subtract 7" from the length of the board and have the sled provide the extra 7" required)

3) Five #6 wood screws, countersink bit

4) Sandpaper, drill, wood glue, epoxy, stain or paint and clear finish

5) A Dremel-type rotary tool with assorted sanding wheels and bits to sand small details and speed up preparation for finishing.

Apply stain/paint and clearcoat of your choice. Here’s what I used on my Black Forest Wall Shelf made from Select Pine:

• Minwax Red Oak stain #215
• Several coats Krylon acrylic clear (spray)