I saw these nice brass bit adapters to adapt 1/8 to 1/2. Might work nicely to hold 1/8 inch bits in the CT.
http://www.k2cnctools.com/proddetail...rod=1/8adapter
I saw these nice brass bit adapters to adapt 1/8 to 1/2. Might work nicely to hold 1/8 inch bits in the CT.
http://www.k2cnctools.com/proddetail...rod=1/8adapter
Last edited by bergerud; 03-18-2012 at 10:02 AM. Reason: Direct to site is cheaper