Hi,
what function do they serve?
Thanks,
Felix
Hi,
what function do they serve?
Thanks,
Felix
There are two functions.
First, is to assure that the cutting head is a set distance from the chuck on the first and 2nd insert.
Second, (in my opinion) is to match the specs as to the proper distance the head (or cutting tip) should be from the chuck. They also keep the small bevel, behind some bit heads, from the chuck/collet. The bevel could end up causing the bit to loosen in the chuck or collet.
I bought my first set from LHR, but from then on, I just went to the hardware store and got some tubing and cut my own.
AskBud
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Well I agree with that and I bought a set from LHR. But there are different sizes in them so does anyone have an idea as to the rhyme or reason for that?
Tom
Thanks Bud.
I thought it could have something to do with vibration as well.
Felix
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Thanks Bud!
I use O-rings, with a dab of CA glue on the cutting bit side. Has held in place and works great for me. Got the O-ring kit from harbor Freight, believe it was about $7
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
There's two sizes. 1/2 and 1/4 for the two different size bits in full bit set.
Sent from my iPhone using Tapatalk
CarveWright CX Packaged System - starting at $2000
CarversClub 1 Year Subscription - $150.00/year
Adv. Support w/out CC membership - $25.00/issue
CarveWright Community Forum - PRICELESS!
when i recieved the carveright I thought it was for shipping to protect the arbor I did'nt know they had a reason.... I did'nt throw them away thank gosh...