Here is a quick one, needs a lot of work yet. If you are interested in me continuing send me a PM
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Wow! Thanks for the quick responses! Maybe I should have asked before I spent so many hours trying to do it myself! Of course, I won't learn much if I don't try it - and it makes me much more appreciative of good patterns!!
Colleen, here is what I have so far. Again not finished but getting there.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Had a little time to work on this again yesterday. Putting in the details, and once that is done the pattern should be done.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
I see you are getting pretty good now Eddie! Nice work! Soon you may be right up there with John.
Doug Fletcher
Doug, thanks, as far as John, may never get as good as he is.
Chevytrucking, I use Moi and zbrush. Zbrush to sculpt what you see here. Moi3d to make the initial pattern shape.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
OK.... I could use a little history lesson here. Who was Chief Joseph?.......... I've been out of town.
JerryB:.
CarveWright START U Team Member
Using 1.187, Conform, PE/Probe, Centerline.
"Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"