Page 1 of 4 123 ... LastLast
Results 1 to 10 of 36

Thread: Quilted Heart Box- Project of the Month FEBRUARY 2012

  1. #1
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,123

    Default Quilted Heart Box- Project of the Month FEBRUARY 2012

    Hello,

    Here is a preview of the next Project of the Month (for FEBRUARY 2012), the Quilted Heart Box.

    Make a loved one smile with this unique “quilt-top” heart box! Fill it with “goodies” or...ahem...fine jewelry for that special someone in your life!
    The project uses the 1/16" Carving Bit and the 1/8" Cutting Bit. No other bits are required.
    The overall dimensions of the finished Quilted Heart Box project are about 8½" x 7½" x 2" ( or 3" or more) tall.

    NOTE: This project includes an extra box-section mpc file for making one (or more) additional sections to increase the height and storage capacity of your box, if desired.

    Main items you will need:

    1) The Project Files (included):
    • Quilted_Heart_Lid.mpc
    • Quilted_Heart_Box.mpc
    • Extra_Box_Section.mpc (optional)

    2) Boards with the following dimensions:
    Heart Lid: .75" x 9" x 23"
    Heart Box: .75" x 9" x 24"
    Extra Section: .75" x 9" x 16"

    (NOTE: Do not use boards that are smaller than specified above, or if you are using a sled, you can subtract 7" from the length of the board and have the sled provide the extra 7" required)

    3) Sandpaper, wood glue, clamps, stain and/or paint and clear finish, three self-stick felt or nylon disks for placing onto the underside of the box

    4) A Dremel-type rotary tool with assorted sanding wheels and bits to sand small details and speed up preparation for finishing.

    Apply stain/paint and clearcoat of your choice. Here’s what I used on my Quilted Heart Box made from Select Pine:

    • MinWax Sedona Red stain #222
    • Several spray coats of Krylon Clear Gloss acrylic
    Attached Thumbnails Attached Thumbnails Closed_Quilted_Heart_Box550x489.jpg   Open_Quilted_Heart_Box550x413.jpg   machining_quilted_heart.jpg  
    Last edited by mtylerfl; 01-27-2012 at 01:45 PM.
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

  2. #2
    Join Date
    Dec 2008
    Location
    Wylie, Tx
    Posts
    1,680

    Default

    another Home Run sir!
    JerryB:.

    CarveWright START U Team Member
    Using 1.187, Conform, PE/Probe, Centerline.

    "Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"

  3. Default

    Awesome ... another great box.

  4. #4
    Join Date
    Nov 2007
    Location
    Las Vegas NV
    Posts
    1,267

    Default

    Great box and just what I dided for Valentines present to wife.

    Thanks

  5. #5
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,123

    Default

    Thank you, everyone! I already gave one to my wife - she picked the stain color for hers.
    Last edited by mtylerfl; 01-27-2012 at 08:04 PM.
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

  6. #6
    Join Date
    Jan 2007
    Location
    mira loma, ca
    Posts
    296

    Default

    looks like another awesome project... one complaint though, the pics show a clean organized shop.... that's just wrong...lol

  7. #7
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,123

    Default

    Quote Originally Posted by rickyz View Post
    looks like another awesome project... one complaint though, the pics show a clean organized shop.... that's just wrong...lol
    Ha! I should take a wide photo shot of the shop...not as neat as I would like!

    Ok, against my better judgement, I took a quick snapshot of my shop....here is the link:
    http://forum.carvewright.com/showthr...883#post170883
    Last edited by mtylerfl; 01-28-2012 at 09:48 AM.
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

  8. #8
    Join Date
    Feb 2007
    Location
    Onset, Ma
    Posts
    1,249

    Default Heart

    Michael, Your projects always go right to the Heart. Great Job! Feb. already, wow!


    Capt Barry

  9. #9
    Join Date
    Jan 2007
    Location
    mira loma, ca
    Posts
    296

    Default

    any word on when it will be available? 13 days til valentines day. definitely want to make some and need to try to work around my work schedule to get them done. just curious

  10. #10
    Join Date
    Aug 2008
    Location
    The Great Texas Gulf Coast
    Posts
    5,314

    Default

    It's set up and ready to go. I'll get Joe to hit the send button.

    I'm not in today.


    Sent from my iPhone using Tapatalk
    CarveWright CX Packaged System - starting at $2000
    CarversClub 1 Year Subscription - $150.00/year
    Adv. Support w/out CC membership - $25.00/issue
    CarveWright Community Forum - PRICELESS!

Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •