Originally Posted by
SteveEJ
For pattern carving the depth is in the pattern and associated settings. You are speaking of V cutting or edge routing, etc. This max depth is in the dialog box that comes up on cutout or assignment of a bit to a vector. The Cut Depth and by selecting the maximum depth per pass check box and assigning a value.
To test this start a new project, draw a box or circle and assign a bit to it. The dialog box I am speaking of will come up after you select the bit asking for the depth of cut. You will see what I mean from there. Play with the software and look at all the tutorials for many more features.
Hope this helps!