Has anyone come up with an adjustable carrier sled plans if anyone has sure would appriciate a copy of the plans.
thanks
Has anyone come up with an adjustable carrier sled plans if anyone has sure would appriciate a copy of the plans.
thanks
Alias here is the tip and tricks on all kinds of sleds
http://www.carvewright.com/downloads...icks_Apr08.pdf
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Picture of my sleds. I use "T" track. One end is screwed down and the other end has bolt installed so it can slide up and down the "T" track along the sled. The ends I cut at 3.75" to cover the 7 inch rule. I use MDF for the end pieces because they are true 3/4" in thickness to fit the boards being carved. Plywood not true 3/4" in thickness and would be shorter in thickness than carving piece, and not stay under rollers as well.
Last edited by Smoken D; 01-18-2012 at 01:03 PM.
Hey smokin d really like that setup could you by any chance send me the length and width of the plywood you used well what im asking is there anyway you could give me sizes and lengths and thickness i really would appriciate it thank you in advance
smoken d is there anyway you could give me the dimensions of all the pieces and the size of the bolts i really like what you did and it would work real nice for what i need.
thanks