I have a complete set of these bits but find no instructions on how they are used
I have a complete set of these bits but find no instructions on how they are used
Here are some quick thoughts. Use most of them just as you would a regular router. Look at the cutting head of each one. That is the shape it will make. The standard Carving and Cutting bits are designed for specific jobs. The carving bit is use on for patterns from the library (and other Raster carves, like raised text).
The straight cutting bit is for cut paths, drilling, and other milling type operations.
The fancy bits may be used on vector lines and edges. The V-bits are what are used, in most cases, for Centerline Text applications.
AskBud
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29