Results 1 to 4 of 4

Thread: Measuring Wrong

  1. #1
    Join Date
    Oct 2008
    Location
    Ontario
    Posts
    27

    Default Measuring Wrong

    HI guys
    I was getting Board edge detection Error 400.
    After reading some posts, I found that the sensor
    on the bottom of the truck(2 Diodes) was covered
    in dust from the inside. How on a sealed unit?
    Anyway I removed it peeled away the glue on the seam
    popped it open cleaned it and put it back together.
    The machine seems to work except its telling me
    my board is 28.5" long but its really 35.5" long.
    Any thoughts on why its measuring wrong?

    Thx Jeff

  2. #2
    Join Date
    Jun 2008
    Location
    ohio
    Posts
    225

    Default measurement

    Your machine needs calibrated soo do a search "calibrate" with these quotation marks or look in manual,,thats my guess
    denny

  3. #3
    Join Date
    Feb 2008
    Location
    Louisburg, KS
    Posts
    2,651

    Default

    Hmmm, 7" difference in the board's measurement...
    Livin' Life
    Lovin' My Carvewright

  4. Default measuring wrong

    your machine is fine....your project is 35.5 inches long and then you selected stay under rollers which requires 3.5 inches extra on both ends therefore creating your 7 inch difference.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •