K2 cnc

[Ike]

If anyone is interested I still have my never used K2 CNC with now out dated V Carve Pro 4.5 and Photo V carve. I intended to learn and use the CNC, but the CW did everything I needed. It is a shame it just sits so I am selling it for $3000.00 now that is with the software I paid over $600.00 I think?

I have attached my original sales receipt to show what I paid without the software. If anybody is interested please PM me and I will give you my home phone number. I also am trying to sell it on e-bay.

Ike

Here is what I bought I removed the other because it had too much personal info.

CNC Router Machine KT-2514 Basic Frame Only Includes kerk Leadscrews
X-Y-Z Axis @.10 pitch. Z comes standard with 3" Z, motor mounts for NEMA23
and 3 couplers .25 I/D. (Not included:Motors,wires,home switches,E-stop,table
top,spindle, mount, software).
1 1,395.00 1,395.00T
2514-CON-SERV... (3) Axis Servo Controller Gecko Drive.
(3) 150 oz/in Close Loop Servos with encoder, Wires with Cat 5 plugs, (parallel,
USB, Power cord).
Emergency Stop switch hardware with 4 feet length wire.
Home Switches
USB plug for additional power
(Newly added relay output only. This is controlled by Mach2 - Mach3 using M
codes
*Does not include the On/Off Router spindle relay hardware – sold at an
additional charge*),
Standard 110 V can be made to 220 V with no added cost (customer must request)
1 1,550.00 1,550.00T
Mach2/3 Mach2/3 Control Software and license. (Reads G-Code - Controls CNC). Window
XP or 2000. Processor (1.00GHz) or greater. Memory 256MB DDR SDRAM.
Hard Drive 20GB. USB. Parallel port on mother board or PCI slot. All background
software to be removed from computer.
1 199.00 199.00T
1 RM-PC892 Router Mount for Porter Cable 892 Router 54.95 54.95T
R-HOOD-PC892 2007 Dust hood for Porter cable mount 892. Fits PC 892, Hitachi, Bosch, PC7518,
Makita. Fits 2.25" hose (Rigid Vacuum).
1 89.00 89.00T
R-RELAY Relay for 110V Router spindles. Used to turn on/off router via mach 2. G-Code
M03 or M04. Plugs into new control box with relay output. Good use to know
when the machine is done with program.

[chief2007]

How is it listed on Ebay - would like to see pictures etc. Thanks

[Ike]

Well it is under woodworking I think? My wife is taking care of the e-bay. I have a photo of the K2 from the K2 site www.k2cnc.com. That is what my machine looks like less the table. I opted not to buy the aluminum table since you need to cover it with a piece of plywood. You still can buy the table if you want. My wife just listed it on e-bay and it may take 24 hours until it posts. We have it listed for $3200.00 on e-bay

Shipping however will be about $350.00 I can't remember if it came UPS or freight or UPS freight? I forgot to mention shipping. Anyway you can see all the options at the K2 website and I can always take pictures of mine if you like. The last time I looked the motor still was wrapped in plastic! It will require some assembly, but all the other components are still in their original boxes. All that is on my sales receipts is what included. It does not include any router.

Ike

[Ike]

I took the personal info from my sales receipt to show what all I bought. I have never used the K2. My wife posted the K2 on e-bay and it was brought to my attention K2 is selling a 2514 for $1485.00. Please not that is just for the frame and does not include a motor. When I bought mine the frame was $1395.00 and for a stepper motor $1475.00 and a gecko servo for $1550.00. I first bought the stepper motor and changed the order to the servo.

Another thing they changed the cut height from 3" to 5". The base price K2 is selling is $1000.00 more then what I paid and I am not sure what a motor cost today? Together the $1395.00 and $1550.00 comes to $2944.00 and that does not include the software and the other equipment to operate the machine. I am asking $3000.00 plus shipping .

Based on what K2 charges using UPS it is,

USA Shipping Estimates: UPS-SCS KT-2514-09 Location Zip Code Price Estimate New York 11104 205 Washington 98195 185 Michigan 48532 205 Arizona 85222 205 Arizona 85024 125 Florida 33176 198 Washington 98115 195 CA 93640 225 RI 2861 245 TX 77545 245 NY 11377 225 PA 19072 205 Arizona 85338 245 CO 80112 245 IL 61554 265 Utah 84050 265

World Wide Shipping Estimates: UPS-SCS KT-2514-09 Location Zip Code Price Estimate ON K1V7H8 298 QU j0k2n0 295 Canada G1K4B9 265 Canada T1W2V4 205 Italy NA 545 UK NA 795 Israel NA 785 Australia NA 845 Norway 4877 725 Melbourne Australia NA 695 Switzerland NA 825 Guadalajara 44230 485 Mexico 36400 685

In the e-bay add I posted $350.00, but I will honor the K2 estimate in our forum. I will entertain any reasonable offers, keep in mind it is still new never used.

Ike

[Ike]

Well an update price I will take $2500.00 if anybody is interested. It sucks I have a never used machine and can't sell it! I have over $4300.00 invested including the software. I have the upgraded servo motor rather then the stepper. If not then I will try to learn how to use it and then sell it as used.

Thank you for reading my post anyway!

Rick

[eelamb]

Ike, that is a great price, but for me right now I can not afford it. That maybe the reason no one has posted, since they are in the same boat as I. I hope you sell it and soon.

[AWoodsmith]

Ike,

E-mail me at AWoodSmith68@comcast.net, I have a few questions for you about what you are selling.

Ed

[Ike]

Ike,

E-mail me at AWoodSmith68@comcast.net, I have a few questions for you about what you are selling.

Ed

Ed I sent an e-mail to you.

[Ike]

Off the market.......thanks

[Digitalwoodshop]

Congrats !!!!!!

AL