tjl232,, that is a VERY SMALL picture. Someone might be able to make a pattern of it if it were MUCH larger. A good rule of thumb is, The greater the picture resolution, the better the pattern.
I am not a pattern maker, but I think those who make good patterns will tell ou the same thing. You need a BIG Clear picture.. also JPG is not a god format to work with.
My Website: www.edscustomcarved.com Patterns or projects made, and uploaded by me, are not to be sold on E-Bay, EVER !.
Thank You....
it appears to be a scan from a magazine... perhaps the online version of the magazine has a better picture? That one is really too small/grainy to work with easily
Liked the truck concept, so here is a 3d model of the tanker part (not finished yet), have about 30 minutes into it so far. This may never be a pattern, with it being a true 3d. Hope to make the cab tonight, and of course the wheel wells on the trailer wheels.
This was done using Silo version 2.2
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.