Loved watching the video. This is the first time I've seen that done! Thanks for sharing!! That semi-truck came out real nice!
Loved watching the video. This is the first time I've seen that done! Thanks for sharing!! That semi-truck came out real nice!
Tom Watson
Two CW's and D.C.-Top Mount Insert @ Ringneckblues.com Get the dust out!!
50" X 48" PDJ Pilot Pro CNC http://www.pdjinc.com
Check out my Facebook page for current carvings at http://www.facebook.com/signsinwood
Watsons Wooden Words http://www.signsinwood.com & Messages in Wood http://www.messagesinwood.com/
Thanks everyone for the comments, and another thanks to John for the video, and yes I was able to track what you did even without sound. Knew some of it but not all. Another thing to add to my list.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Eddie, Thank you all this display, vdieo is great, good learning tool. Capt Barry
Finally made the truck into a pattern. It is now on my site.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Sure looks good! Your a 3D artist! Thanks for all the help you give me too.
Alan
Alan you are welcome. Took the truck a little further, making 3 trucks from the first one. I plan to make another cab, a more modern one too.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie