SteveJ,
Those are very nice. Is that just a clear coat on them?
Junior Member
SteveJ,
Those are very nice. Is that just a clear coat on them?
Last edited by mwhatch; 10-08-2011 at 07:45 PM.
Morton
Junior Member
I put two coats of thinned shellac then several coats of clear. I like the way shellac brings out the personality of the wood.Originally Posted by mwhatch
Last edited by SteveJ; 10-09-2011 at 11:26 AM.
In Memoriam
Nice Job Steve,
I'm starting a folder for myself just for Rotary Carved Round Stock, keep'em coming!
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Junior Member
Thank you for the nice comments. I wish I knew how to get a pattern to conform to a dome.....I thought it was possible, but was unable to get it. My conform option was not active so I guess it only works with vectors? Not sure what to do in the future.... I would like to carve some canon barrels. Have played with it, but not there yet.
Found a tutorial and got my pattern to conform using the merge additive. I need to read the instructions....
Last edited by SteveJ; 10-08-2011 at 08:19 PM.
In Memoriam
I'm sending you a private message.Thank you for the nice comments. I wish I knew how to get a pattern to conform to a dome.....I thought it was possible, but was unable to get it. My conform option was not active so I guess it only works with vectors? Not sure what to do in the future.... I would like to carve some canon barrels. Have played with it, but not there yet.
Found a tutorial and got my pattern to conform using the merge additive. I need to read the instructions....
AskBud
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
In Memoriam
Steve,
Sometimes I just make pattern or elements of a carving Additive
to have them wrap around a domed or curved surface.
Ps you were to quick for me!
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Junior Member
Steve, It just doesn't get any better than that ! Beautiful work ..
Thanks for sharing the pictures..
Ed
My Website: www.edscustomcarved.com
Patterns or projects made, and uploaded by me, are not to be sold on E-Bay, EVER !.
Thank You....
Senior Member
I love your candle sticks. Were you going to provide the MPC for them.
Ladjr
Today was a good day carving. I will try to upload a couple pictures. I carved these candle holders today and wanted to show a pic of the extra vacuum line to eliminate the chips that build up and wil try to get under the dowel. She ran clean as apin and had a great match from the start or the carve to the finish cut. Made my own dowels out of some walnut that has been here for awhile. I also wanted to include the MPC so you can add your own pattern if you want. The jig is great!
Attachment 47855Attachment 47854[/QUOTE]
Senior Member - Moderator
Steve,
Great job on the carve design and finish! That was on of my first thoughts for the added dust collection. I will have to see if I have a 4x2 reducer.
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Junior Member
Thank you. In case you missed the MPC, I will try to list it again. You can add your own pattern to it.
SteveJ-CandleSticks.mpc
Posting Permissions
Reply With Quote