Argh!
Junior Member
I am just sick!
Argh!
I have a fever, and the only prescription is more COWBELL!
In Memoriam
Measure twice, cut once!
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Junior Member
You make designer firewood too!!!!
Senior Member
I have done that a lot ........ I have a shirt to prove it.
Senior Member
yup, been there, done that... break out the board stretcher
On a serious note, I do it a lot less now that I use story sticks as often as I can
Lawrence
Junior Member
No matter how many times I cut it, its always too short!
Senior Member
I have a board stretcher I could sell you. You could make it yourself, but it's kinda complicated.
The 50-50-90 rule: Anytime you have a 50-50 chance of getting something right, there's a 90% probability you'll get it wrong.
Do it on a Mac.
Vietnam Vet '65-'66
In Memoriam
I have to admit to more than a few -- "Doh!" moments myself.
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Senior Member
Done that recently. Dang thing was it was exactly the length in the plans. Checked 50 times and everything was what it was suppost to be. The plan was wrong, I should have checked everything before making it. I thought something was wrong, but did not pick it up till the two parts were made. Only time I was right, all other 1,000,000 times I was wrong.
Senior Member
Maybe we should request that in a future firmware release... and "undo" button on the machine. How sweet would that be!
Doug Fletcher
Posting Permissions
Reply With Quote
