Senior Member
Round corners on a regions ????
I have 2 attachments with regions one has square corners the other has round corners, I don't know why.
My friend and I created a MPC on his machine and we are both running V1.179, yet he comes up with round corners on his MPC and have sq. corners on mine. I like the round corners, does any body have any ideas whay this happens.
Am I missing a setting somewhere?
Myshop
Perry
My Shop 1044
CarveWright START U Team Member
V - 1.187 and 3.0 too
With the DC Insert," dust all gone"
CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
www.customcarvingsbyperry.com
I have often wondered why it is that
Conservatives are called the "right" and Liberals are called the "left".
"The heart of the wise inclines to the right, but the heart of
the fool to the left."
Senior Member
Check your feather & flip feather settings. (Guessing right now.. not near a comp with designer)
Doug Fletcher
In Memoriam
DB is correct!Originally Posted by dbfletcher
The carve area feather is flipped on one of your MPCs. The inside feather is sharp and the outside feather is rounded.
AskBud
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Posting Permissions
Reply With Quote