I just finished installing the CT and everything worked like a charm. One would have thought that Al Who did the change out (OK... well maybe wasn't done that quick). However, the instructions that came with it were right on the money and I made a test carve and all is good so "Houston ... we have contact and are back in service". I am using the Rock Chuck 1/2: sleeve with my bits since that's what I was using before and the sleeve works fine in the CT. Now I'm going to have to heat up the old Rock Chuck on the old spindle so I can remove it and put the old QC back on so I can return it and get my CT rebate. Course if I was like Al Who I would have already removed it around 2am while doing 3 other things at the same time! ; ) Ain't sayin'... just sayin'..
JerryB:.
CarveWright START U Team Member
Using 1.187, Conform, PE/Probe, Centerline.
"Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"