Page 13 of 13 FirstFirst ... 3111213
Results 121 to 130 of 130

Thread: Show off stuff you've made (not only with CW)

  1. #121
    Join Date
    Jan 2013
    Location
    Lubbock, TX
    Posts
    145

    Default

    It's not all that bad, you can get started with slimline pens easy enough. You need a lathe, the grizzly sounds like a fine starter machine. A mandrill, grizzly appears to be a 3/4" 16 tpi which is common enough and what I have on my PSI lathe. That will set you back about $35 and will have a set of 7mm spacers already on it for your slimline pens. I would go ahead and spend about ten bucks on some spare 7mm bushings, you will go through them at first. You already have sand paper I'm sure, and probably have plenty of wood scrap to make pen blanks with to start out. I would get some micromesh, about $20 if you don't get the pad type. For a very easy finishing product to start with, get some shellawax, it does a fantastic job and holds up very well to use, will cost you about $35. For the pen kits, just get the ecoline pen kits. They are very cheap, about 2 bucks a pen, and honestly have held up as well for me as the more expensive slimline pen kits. That's pretty well it in a nutshell. From there you can just expand over time to make other pens and other items. I sell about 300 pens a year at $20-$80 each, so it can pay for itself in time, once you get good at it.....plus it's a great way to use up exotic wood scraps!

  2. #122
    Join Date
    Aug 2011
    Location
    Michigan
    Posts
    1,108

    Default

    I agree with all the comments about pen making. I have been building furniture for a long time and it can take weeks on a part time basis to get something that looks like anything, but a pen is done in about an hour. I went to a "free" pen making class at woodcraft about 15 years ago and after coming home with about $100 worth of stuff (already had the lathe, thank God), I started turning pens and haven't looked back. Great gifts, have sold a ton of them and just enjoy the break from bigger projects. Lots of suppliers and choices. Half the fun is finding new sources of materials and works. Some of my latest are attached.



    Click image for larger version. 

Name:	SlimLine.JPG 
Views:	54 
Size:	93.2 KB 
ID:	59888Click image for larger version. 

Name:	MontBlanc.JPG 
Views:	57 
Size:	97.5 KB 
ID:	59889Click image for larger version. 

Name:	MontBlanc1.JPG 
Views:	59 
Size:	118.0 KB 
ID:	59890Click image for larger version. 

Name:	BoltActionPens.jpg 
Views:	69 
Size:	66.6 KB 
ID:	59891
    John
    www.jdmwoodworks.com
    Facebook Page: click FB button on web page

    Bessemer, MI (shop location)
    Lake Gogebic, MI (where I hang my hat)

    "He who wants by the yard, but gives by the inch, should be kicked by the foot"...

  3. #123
    Join Date
    Dec 2011
    Location
    Arkansas, USA
    Posts
    120

    Default

    Quote Originally Posted by TerryT View Post
    Nice work Mathman. I really like the truck. Well done.
    Thanks! It helped having a good paint and body man - and one that let me work on it with him at his shop.

    And this is my first attempt at scroll saw work:

    Click image for larger version. 

Name:	shelf.jpg 
Views:	94 
Size:	94.7 KB 
ID:	59900

    That was one of those projects that kept growing as I went - other than having three shelves it bears almost no resemblance to what I had initially designed. So much for drawing out plans...

  4. #124
    Join Date
    Apr 2009
    Location
    Snellville, GA
    Posts
    1,477

    Default

    Quote Originally Posted by jmoriearty View Post
    Capt, when you are ready to try a hand a pen turning, don't let yourself get flustered with all the videos and information out there, most of it is garbage. I buy my supplies from www.woodnwhimsies.com, they are fantastic people and have some very nice stuff. They also resale PSI supplies cheaper than PSI will sell to us for. I used to spend about 8k a year with PSI and they wouldn't cut me a deal on big orders, so I switched. Hit me up if you have any pen turning questions, we've been doing them for 3 generations....4 counting my son.
    Jmoriearty and others,

    Thanks for the kind advice and tips on pen crafting. That new hobby will have to await my upcoming retirement but it looks like such a natural fit to what the CarveWright does so well for matching fitted cases and bases. Thanks for all you've shared Gents.
    Fair winds,

    Capt Bruce
    Kinney deSigns http://kinneydesigns.us
    CarveWright START U Team Member.

    30 year USN SEABEE, the original Weapons of Mass Construction.
    Designer Ver 1.187 and 2.007, Ver.3.001 One 2009 B CW w ROCK and a 5th Year Anniversary C CW
    Rotary Jig, 2D and 3D, Tracing Probe, DFX and STL Importers

    .

  5. #125
    Join Date
    Aug 2007
    Location
    North Carolina
    Posts
    1,367

    Default

    Dangit capt, I hadn't even thought of that. Man I need to get into this pen turning.

    Sent from my ADR6300 using Tapatalk 2
    Custom Stadium Coin Racks for displaying Military Challenge Coins, GeoCoins and the like- http://www.etsy.com/shop/stadiumdisplays
    OR http://shop.ebay.com/stadiumdisplays...&_trksid=p4340

  6. Default

    Click image for larger version. 

Name:	jim's man cave.jpg 
Views:	83 
Size:	68.4 KB 
ID:	81169Click image for larger version. 

Name:	ridley.jpg 
Views:	96 
Size:	98.5 KB 
ID:	81170Click image for larger version. 

Name:	larsen music.jpg 
Views:	88 
Size:	105.8 KB 
ID:	81171 A few of my Carvewright carves.

  7. #127
    Join Date
    Nov 2007
    Location
    Redmond, Or
    Posts
    360

    Default

    Good job halftone. Nice detail.

    Mike
    All Gave Some,
    Some Gave All.

    My computer configuration and software used:
    Gigabyte GA-990XA-UD3 Motherboard, AMD FX 6-core Processor Black Edition, 32 Gig DDR 3 Ram, Gigabyte HD 6450 Video Card with 1 Gig DDR 3 ram, Windows 10
    Designer 2.007, Designer 3.102, Pattern Editor, Centerline, Conforming Vectors, 2d Tools, 3d Tools, DXF Importer, STL Importer and Rotary Jig.

  8. #128
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,216

    Default

    Very cool. I especially like the man cave one.

  9. #129
    Join Date
    Jan 2008
    Location
    Crooked River Ranch, OR
    Posts
    1,459

    Default

    All three are excellent carves and finishes. Hope we will be seeing more of your work in the future.

  10. #130
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,101

    Default

    Outstanding work, halftone! Beautiful job on all.
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

    Visit the CarveBuddy Website for Additional Exclusive Patterns and Resources

Page 13 of 13 FirstFirst ... 3111213

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •