That I believe I will have.....
AL
That I believe I will have.....
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
Well we’re still here; -- today the storms are off in Canada heading East somewhere.
There was Lots of wind and rain to blow things around, we're thankful the worst of the weather skip right over us, we lost a small Flowering Plum and Golden Creek Birch Tree, also the little Creek behind our house -- “Normally 1’ deep and 7’ to 8’ wide” was over it's banks 90’ wide and on to our walk way. The center photo is from last year of my youngest son Scott standing on the walk way between the Creek -- 40’ behind him and our Fish Pond 30’ in front of him. The photos on the left and right are from this morning after the water receded down the grassy banks to about 30’ wide. Last night if the water had come up a foot or two deeper, we might have lost the Fish in the Pond to the Creek.
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Glad you are OK Ken! That water sure can rise fast! Thanks for sharing the pictures!!
Tom Watson
Two CW's and D.C.-Top Mount Insert @ Ringneckblues.com Get the dust out!!
50" X 48" PDJ Pilot Pro CNC http://www.pdjinc.com
Check out my Facebook page for current carvings at http://www.facebook.com/signsinwood
Watsons Wooden Words http://www.signsinwood.com & Messages in Wood http://www.messagesinwood.com/
A really big Thanks! for thinking about us, you see in the photo where the water level
was from the walk way to the silt line left on the brush on far bank.
This Morning we had a few Refugees come up form the Creek
to our back deck looking for a hand out.
Last edited by Kenm810; 05-31-2011 at 06:47 PM.
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
They are telling us to get ready for a massive flood in the Missouri vallry from SD south . Water may get 2-12 ft deep here next wk. and stay till Oct. My home and shop are in the are so for the last few days we have beengetting ready .
If you need any wet wood sounds like I may have it for you.
Post so quick pictures will keep you all up to date,
My wife she feels like a Princes living behind a mote now.
OLD SALT
Member CarveWright Start U team
Good luck Salt hope its closer to the 2foot than the 12
I'm a professional toothpick maker.
TK Designs
We'll be thinking about you all, while hoping for the best!
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Old Salt, I hope you do not get any flooding, but if it has to come your way let it be the lesser amount. Stay safe.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
And here I was complaining because we might get rain showers tomorrow. Hope that is all that comes your way.