I know this has been answered on here before, but I can't find it. What are the screw thread sizes for the mounting holes?
I know this has been answered on here before, but I can't find it. What are the screw thread sizes for the mounting holes?
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Thank you very much
Wow! I haven't been on here in awhile... I'm glad you are liking the DC!
ROCKin' with my Dust Collector - Get the mpc here
http://forum.carvewright.com/showthr...ve-it-yourself
Alot of folks ask about cutting the plastic cover. After a couple of projects on my machine it would shut off when you raise the hood (I would vacuum the dust out) so I just hard wired the switch. I can open and close at will while the machine runs. If warranty is issue, just hook back up if sending machine in, they don't know its been unhooked. If using these dust collectors, the plastic hood comes off easy.
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Sticking a vacuum in there while on can short your controller. Get a dust insert, blow the dust out of your switch and reconnect your safety device. Cheaper than a controller and less chance of harm to your digits.
CarveWright CX Packaged System - starting at $2000
CarversClub 1 Year Subscription - $150.00/year
Adv. Support w/out CC membership - $25.00/issue
CarveWright Community Forum - PRICELESS!
I do not have a large shop hose to hookup and use a 1 1/2 in. hose. This is how I am attaching, it
swivals so you can put anywhere. Also just so not to get anyone upset and make sure all rules are
followed, I will cut hood (will order new one) and switch is hooked back up. I have an A machine and
is long since out of warrenty.