Use this thread to post patterns related to Symbols
Use this thread to post patterns related to Symbols
Robb...anyway you can add screen shots or jpg of the patterns for everyone to see before they open?
Yes, I will do in the future... DB got my back on this one. Sorry...
_________________________________
All the best!
Robert
Visit my company and/or church web page:
My Company Site My Company Blog My Church Blog My Church Website My Patterns
Great ! Thank you sir!
JerryB:.
CarveWright START U Team Member
Using 1.187, Conform, PE/Probe, Centerline.
"Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"
Is there any way to subscribe to a thread without posting to it?
(Looks like I subscribed to this thread, and asked a valid question at the same time).
Livin' Life
Lovin' My Carvewright
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
I developed this slightly 3D MPC of the US Navy SEAL device to honor a retired Senior Chief SEAL who works with me. I hope this may serve others who want to honor another warrior. Please feel free to modify, improve and share the design as my skills are still limited.
Here's a carved view
If you wish to work on this I'll share the PTN or artwork for your use.
Last edited by Capt Bruce; 02-06-2011 at 05:18 PM.
Fair winds,
Capt Bruce
Kinney deSigns http://kinneydesigns.us
CarveWright START U Team Member.
30 year USN SEABEE, the original Weapons of Mass Construction.
Designer Ver 1.187 and 2.007, Ver.3.001 One 2009 B CW w ROCK and a 5th Year Anniversary C CW
Rotary Jig, 2D and 3D, Tracing Probe, DFX and STL Importers
.
Mark looks like you learned alot and produced a wonderful ptn. Thanks for sharing.
Bergerud, the torus knot is one of the basic primitives in blender so this took about 1 minute to move into CW.
It is a kind of freaky symbol. The (p,q)−torus knots arise when considering the link of an isolated complex hypersurface singularity. lol.
I was talking to a scientist today at work about theoretical waveform propagation and since I have killed most of my brain cells he must have thought he talking to a fence post. A little bit like me trying to read about hypersurface singularities.
Here is a likeness of a 58 Chevy hood ornament I made using the new Vector Drawing and Pattern Modeling suites. I found a photo on the internet and imported into the Image Tracer, then used the Sweep tool to create the elements of the ornament. The Fleur-de-lis 01 was dropped in from the basic pattern library. It took a lot of tweaking to put together but I have learned a lot about the new modeling tools! See original photo I used, a JPG of the pattern, and the PTN below.
Mark W