-Objects

[dbfletcher]

Keyhole Insert

This is a Keyhole insert I made for one of my projects. I routed out a pocket on the top, then in the scrap area made the
insert 3/16 deep and sliced it on the bandsaw at an 1/8 thick and glued it into the pocket.

Nice job. However, Im not sure if you are aware than many of us just use a keyhole bit successfully with our carvewrights. I'm know you can do it with the Rock Chuck and I'm pretty sure it also works fine with the Carvetight. If you search the forums for keyhole you should find the relevant posts as well as sample mpc's on how to set it up. If you cant located them, let me know and I'll dig the up and post back here.

Here is the post I was refering to:

http://forum.carvewright.com/showthr...hlight=keyhole

[b.sumner47]

Thank yOU ! tHAT'S ONE THAT i CAN USE. cAPT bARRY

[mtylerfl]

Keyhole Insert

This is a Keyhole insert I made for one of my projects. I routed out a pocket on the top, then in the scrap area made the
insert 3/16 deep and sliced it on the bandsaw at an 1/8 thick and glued it into the pocket.

That's a neat idea, Dave!

[lawrence]

very cool stuff you guys have all given- thank you very much! I love outside the box thinking like the keyhole idea and the tools look great too.

Here's another mpc- a bowie knife


I could see this coming handy as a wall plaque etc.

Lawrence

[lawrence]

I promise I'm not violent... (in fact, I'm married to an English Woman and I'm more liberal than she is!) but here's another weapon. This one is a Beretta 9mm


The MPC includes a model with the beretta symbol on the grip and one without in case you want to put something else there.

I think my next files will have to be fluffy bunnies or something to balance things out.

Lawrence

[Kenm810]

Lawrence, Really Great Mps File --Thanks for sharing

When I saw your Bowie, I just had to make into a 2 Sided Carving

Ps. Only added some Blood Grooves -- Please keep them coming

[lawrence]

Ok, here's another-- I know there are a lot of folks here that seem to request bike MPCs... here's a H@r ley F@t b0y lookalike (letters changed to fool the bots)


I'll try to do a quick video to show how I'm doing these-- Lawrence

[lawrence]

one more-- a cartoon car

[henry1]

Lawrence, Really Great Mps File --Thanks for sharing

When I saw your Bowie, I just had to make into a 2 Sided Carving

Ps. Only added some Blood Grooves -- Please keep them coming

Ken 2 sided carve did you add it and how was that done maybe I can do it with the nutcracker

[Kenm810]

Good Morning Henry,

Because both sides needed to match each other, I just did a copy/paste of Lawrence's Bowie Knife Mpc,
inverted and centered it for the carving on the back of the project board. The Nutcracker would need a
second Mpc file of the Back or Modification of the Front Pnt or Mpc File to look like a back for the Nutcracker.