Here are 3 cameras.
AskBud
camera-3.ptn camera-2.ptn camera-1.ptn
Here are 3 cameras.
AskBud
camera-3.ptn camera-2.ptn camera-1.ptn
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Derby style cane handle
Cane-Handle-01.mpc
This is the Anchor ptn that I used to make a lamp.
here is the link for the PTN http://cid-447ebe4c195b71bd.skydrive...4C195B71BD!113
here is the link to the lamp http://forum.carvewright.com/showthr...ak-Anchor-Lamp
Last edited by CasinoDuck; 06-17-2011 at 01:10 PM.
Playing around again waiting on a customer and made this pattern of a carpenter tool set.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Thanks, Eddie. The ptn is real nice. I have a grandson who will like a new room sign. Capt Barry
Thanks for the carpenter tools ptn I love it!
Thanks Capt Barry and Greg.
Edit: Just a side note all patterns I post here are on my web site, free patterns are under shared patterns.
58 patterns for sale, and 106 patterns shared
Last edited by eelamb; 09-13-2011 at 08:30 AM.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Keyhole Insert
This is a Keyhole insert I made for one of my projects. I routed out a pocket on the top, then in the scrap area made the
insert 3/16 deep and sliced it on the bandsaw at an 1/8 thick and glued it into the pocket.
Keyhole-Insert.mpc