Thanks guys, glad you liked it. I saw the picture and had to make it.
Thanks guys, glad you liked it. I saw the picture and had to make it.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Image from the grayscale web site of horses in a frame. I cleaned it up, removed the lettering, and made it into a pattern. It is about 13 x 5 x .25"
Ok here is a really nice pattern guys and gals, enjoy.
Well the PTN is too large (1.46m) so send me a PM with your email and I will send it to you.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Thank You Bud!
Todd
Last edited by CWFan; 06-27-2012 at 07:27 PM.
Mike Larry, Dave, check your email. Roger I need your email address to send it to you.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Yes, those are great grayscale patterns. That site has a wealth of patterns.