Allen Head Screws for Z-track

[SharonB]

Does anyone know where to order the 5mm x 14mm x .08 Allen head screws that fit the Z-track online? I have tried all the local stores and find none available here in Central Oregon. Since I have the Z-track apart I'd like to put new screws in. Because once my other parts gets here from Texas I like to get my machine back together.

[earlyrider]

McMaster would have them, also Graingers. Auto parts places might have them, and possibly farm supply stores.
Ron

[wgrigsby]

Hi

I replaced mine with Allen head screws also. I got the from a place near me and I'm giving you the Web site address. They are honest and can supply you with what you want.

http://bolts-nutsofhancock.com/

Hope this helps you.

[fwharris]

I got mine from Ace hardware.

[jaroot]

Mine came from Home Depot.

[CarverJerry]

Fastenal should carry them also.

CJ

[kool69sporty]

Sharon, be aware that a standard 5mm flat-head Allen screw has a 10mm diameter head. That's fine for 2 of the Z-truck bearings (and all 4 of the Y track), but those 2 screws that fit into the upper counterbored holes use 8mm head. So, grind off a millimeter on the radius of the flat or go with the ones from LHR.
Joe

[al2888dj]

check here fast shipping www.soigeneris.com good prices ,