You can always raster carve the area with a 1/8" feather (not flipped), hen go around it with a 1/8" cutting bit with a 1/16" inset to square up the edges. Quicker to design, but longer to carve = same result.
Clint
2016 Conference Sponsor
You can always raster carve the area with a 1/8" feather (not flipped), hen go around it with a 1/8" cutting bit with a 1/16" inset to square up the edges. Quicker to design, but longer to carve = same result.
Clint
Posting Permissions
Reply With Quote