HI
Installed conforming vectors all i need now for someome to tell me how to operate it.
I just can't figure it out. I want to put text on a cane .
thanks
jim
HI
Installed conforming vectors all i need now for someome to tell me how to operate it.
I just can't figure it out. I want to put text on a cane .
thanks
jim
Last edited by MCGEE2SKINNER; 11-02-2010 at 11:23 AM.
Conforming Vectors, is for use on Centerline text that is placed on a carved Region, as well as other vectors.
You have selected Raster instead of Centerline.
You will see a "New Check Box" with the word "Conform" to the right of the size boxes.
Here is a link to one thread on Conform
http://forum.carvewright.com/showthr...346#post140346
AskBud
Last edited by AskBud; 11-01-2010 at 09:35 PM.
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
I would Pick Centerline and Check the Conform Box,
and maybe use the 60-Degree V-Groove bit rather than the Default 90-Degree bit.
You may also need to flatten a small area on the side of the cane -- until someone
can get the text to follow the curve of the cane
Last edited by Kenm810; 11-01-2010 at 07:53 PM. Reason: Added Photo
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
That is a pretty Cool Project.... Since I am .ptn challenged, I am always looking for patterns that I can use....
I am interested in getting this pattern from you and others you might have like a Bear.... Yes, it is posted here but I like to have permission to use a pattern and pay you a fee for that right.
I was able to put text on both sides. There are no Tabs, do you just leave a skin in the center to hold the piece?
Nice....
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
HI bud
THANKS FOR THE INFO. THE CONFIRM BUTTION WAS NOT THERE UNTIL I OPENED THE PROGRAM THE SECOND TIME.
THANKS
JIM
HI AL-WHO
I DIDN'T DEVELOPE THE PATTERN I PURCHASED IT AT
http://www.carvenow.com/product_info...roducts_id=402
AT A VERY GOOD PRICE.
JIM
Thanks Jim,
Since I sell all the stuff I make, I feel better having gone to the Carvenow site and just bought the Duck and since I was there... A Turkey and Eagle I was happy to find....
Thanks Buddy,
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
MCGEE2SKINNER please check your private message.
Thanks.
HT
H. T.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Friends Don't Let Friends Use bad patterns!
For high quality patterns please email me or check out my website at: http://carvenow.com . Thanks!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *