rachet gear

[CHRISTIAN]

Now I really have done it the rachet gear on the head quit working guess I cranked to many times. I have taken the top off to expose the gear but it looks like it is a part to return for repair. Is this a user fix??? If so what parts do I ask want to ask for??

[dbfletcher]

Can you give some more detials? Is it stuck at the top or does it not go up or down? Any additional info will be helpful.

[CHRISTIAN]

the crank just turns and nothing happens. I have the part here on my desk and i cannot make the gear move. I feels like something is turning inside but is not transfering to the gear itself

[dbfletcher]

It sounds like the handle came loose. For lack of a better description, the handle is sping loaded and keyed. It doesnt engage untill the "keyes" are lined up and the handle screw is completely seated. Are you saying on the machine the handle spun freely in both directions?

[CHRISTIAN]

Yes, I cranked it down but it refused to rachet the handle just turned and then I couldn't get it back up.

[dbfletcher]

Im still unclear on what you are saying. On my machine I have expreienced two issues with the crank.

1. I could carnk the head down, but the it wouldnt ratchet and I could feel there was way too much head pressure. Turning the other way the head came back up.
2. I could spin the handle in both directions freely and the head never moved at all in either directions. (This was a simply fix of just tightening the crank handle screw... it had worked loose)

Are either of these your symptoms or do you have another problem all together? Is the crank mechanism still in the machine or have you removed it? It sounded like you have it removed from the machine currently.

[CHRISTIAN]

I removed it but will go out and reinstall it maybe it was loose. The screw was very tight. will let you know how it goes. Will post findings when I get it put back together. sure do appreciate your help.

[CHRISTIAN]

I put it all back together but the screw that holds the crank keeps coming loose. If i turn the crank real slow I can get it to move the head alittle before screw comes loose. I put a lock washer on it but it still does it. Do you think I should put a dab of thread lock on it or am I just asking for more problems????

[dbfletcher]

I dont think you have it seated correctly. If you push in on the handle a little while you turn the handle, you'll find a spot where the handle "slips in". That is when you want to tighted the screw.

[CHRISTIAN]

I found the key and pressed it on but the handle just turns it is not engaging the gears.