Hi Doug,
I get mine at Lowes they are not with the long hinges, look where the hinges and knob section is, there is an area for small box building, hinges and clasps etc. they have 6” and 8” I believe.
Cheers.
Ray
Hi Doug,
I get mine at Lowes they are not with the long hinges, look where the hinges and knob section is, there is an area for small box building, hinges and clasps etc. they have 6” and 8” I believe.
Cheers.
Ray
Don't know if I'll do it or not this time. But when I make this box was thinking of deleting the Eagle, make the top, and then also past the Eagle onto a contrasting wood, cut the Eagle out and overlay it onto the then bear top. Just for the heck of it. Maybe, will see.
Sounds like that should look really nice. we'll need to see some pics when you get that done.
JerryB:.
CarveWright START U Team Member
Using 1.187, Conform, PE/Probe, Centerline.
"Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"
JerryB:.
CarveWright START U Team Member
Using 1.187, Conform, PE/Probe, Centerline.
"Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"
JerryB:.
CarveWright START U Team Member
Using 1.187, Conform, PE/Probe, Centerline.
"Let's start sharing PTNs instead of MPCs so ALL SW versions can view & share"