Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Will not scan

  1. #21
    Join Date
    May 2007
    Location
    robertsdale alabama
    Posts
    1,044

    Default you'll be amazed at

    the detail that the probe will pick up.
    my patterns are at www.upillar.com do a search for "ptn"

    email for patterns: patternmaster@live.com

  2. #22
    Join Date
    Oct 2009
    Location
    Ohio
    Posts
    1,662

    Default

    I did a scan of a project that I had carved, it had a finish on it but the probe even picked up the wood grain. It is very sensitive...have fun.

    CJ

  3. #23
    Join Date
    May 2007
    Location
    robertsdale alabama
    Posts
    1,044

    Default we like to

    see pics too.
    my patterns are at www.upillar.com do a search for "ptn"

    email for patterns: patternmaster@live.com

  4. Default

    I had that same problem, and just got frustrated and turned the machine off for a few min, and it worked after a brief break.. odd

    now the problem I am having is that the scan never starts at the point I jog to as the starting corner, it will go about 1/3 into the object and start there.

    example: my object is flat and measures 5 inches wide by 20 inches long.
    I jog to the correct corners, it gives me the correct dimensions, but when it starts the scan, it stars about 1/3 into the 20 inches.. weird

  5. #25

    Default

    Sorry forgot you asked for pic's. Well I finally scanned the item to get my template. The design I used is one of the stained glass shared designs from the forum. I still need to put the holes in and sand/finish to apply.


    Quote Originally Posted by TIMCOSBY View Post
    see pics too.
    Attached Thumbnails Attached Thumbnails 100_0009 (Small).JPG   100_0003 (Small).JPG   100_0007 (Small).JPG  
    Andrea

  6. #26

    Default

    Ok, here's the final. What do you think.
    Attached Thumbnails Attached Thumbnails 100_0024 (Small).JPG  
    Andrea

  7. #27
    Join Date
    Apr 2009
    Location
    Snellville, GA
    Posts
    1,477

    Default

    Very nice Andrea. Welcome to the wide world of scanning.

    My only problem is having so many things I want to scan I'm cheating myself out of carve time. Again well done there.
    Fair winds,

    Capt Bruce
    Kinney deSigns http://kinneydesigns.us
    CarveWright START U Team Member.

    30 year USN SEABEE, the original Weapons of Mass Construction.
    Designer Ver 1.187 and 2.007, Ver.3.001 One 2009 B CW w ROCK and a 5th Year Anniversary C CW
    Rotary Jig, 2D and 3D, Tracing Probe, DFX and STL Importers

    .

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •